|
|
||
|
D2000A PWM Amplifier.
|
D2000A specs |
|
|
Rated power 4 ohms |
2000W |
|
|
Power supply max. |
2 x 65V DC |
|
|
Aux. supply |
16V DC |
|
|
Freq. Range (+0, -1dB) |
20 – 20.000 Hz |
|
|
THD + N |
0.02% typ. |
|
|
Dynamic range |
110dB typ. |
|
|
Max. output current |
55A |
|
|
Min. load impedance |
4 ohms |
|
|
Damping factor |
400 typ. |
|
|
Input voltage |
1V - 10 k – balanced |
|
|
Operation |
Full bridge amplifier |
|
|
Plugin/expansion header |
Yes |
|
|
Peak limiter |
Yes |
|
|
Dimensions |
120 x 80 x 30 mm |
|
|
Heatsink |
external (small) |
|
|
Available as sample |
Yes |
|
|
Available as OEM design |
Yes |
|
|
|
D2000A is a PWM /Class-D amplifier designed to give very high performance in audio quality and to deal with all aspects of amplifier use and applications including amplifier + power supply combination, multichannel use , active crossover use, etc.
Power output is 2000W into 4 ohms, overcurrent protection is likely to operate with continuous high power levels into 2 ohms.
D2000A is a full bandwidth module (20 kHz power bw) and can be used for a broad range of applications from HIFI, Home Cinema to Pro Audio, Active Speakers, Installation... Sound quality is very good indeed and THD + N is 0.02% or better. The D2000A can be powered from a linear supply , a switch-mode supply or a D2000ASW module.
D2000A has these connections: * Balanced input header (3-pin molex) * Expansion header (8-pin molex) with input/output + power for external signal processing, crossover, eq,… * Front panel header (7-pin molex) with volume control in/out + output to led meter and power for this. * Channel-2 link (6-pin molex) with clock and audio connection to additional channel module. * Mode selector (2x6 pin molex) selects fullrange, high or low for both main module and ch-2. * Power input (4-pin connector) 2 x 65VDC + 15VDC
|
|
|
©2008 - all rights reserved - digiamps.com (a division of CAD Audio dk) |
||
